Shmee150 Chooses QuickSilver for his Ford GT Exhaust - QuickSilver Exhausts
Shmee150 Chooses QuickSilver for his Ford GT Exhaust

Shmee150 Chooses QuickSilver for his Ford GT Exhaust

May 24, 2023


Youtuber Shmee150 contacted us about developing a better exhaust system for his beloved Ford GT

We were of course happy to oblige.


From factory, the car comes with a Stainless Steel rear section. Though strong, it's rather heavy and muted in the sound department. Ford offer an optional sport system made entirely from Titanium, which has less internal silencing and less than hald the weight. Despite being slightly louder, it proved to be unreliable.




Above from left to right, the Standard Ford system and Ford's optional Sport system.


Ford's own Titanium Sport exhaust was fitted to Shmee150's Ford GT, which covered some considerable mileage. However, after time, the system developed cracks as Titanium can become brittle following many heat cycles.




QuickSilver Special Projects department examined how, where and why the failures occurred and designed a solution that will out perform its predecessor in every possible way.

Firstly, the sound! We removed the rear box all together while retaining an X pipe to keep the banks mixing. This means they're not out of phase, but essentially straight piped for maximum acoustics.



The X-pipe is clearly visible so the gases can interchange and unique to his GT, we custom branded the system with his logo.



We chose Inconel as a material over Titanium, as its stronger, lighter and can withstand greater heat cycles at higher temperatures - this means it should last a lifetime!




The system was also Cerakoted (ceramic based heat resistant coating) to help reduce heat transfer and stress to surrounding components by up to 20%. 


The coating withstands temperatures of up to 980°c and also aids flow for the exiting exhaust gases.    


The uncoated / raw tail pipes are rolled back double skinned Inconel which due to its strength can be used in incredibly thin thicknesses. 
 

 
Now available to order from our store and ready to make every Ford GT sound like it should. 

We have been designing exhaust systems for the world's finest cars since 1973. Contact us for more information.




Also in Latest News

Shmee150 gets the World's first Ford GT LM QuickSilver system fitted
Shmee150 gets the World's first Ford GT LM QuickSilver system fitted

April 15, 2024

We spoke with the GOAT of the YouTube automotive World about getting our version 2 Ford GT system fitted. This system features our 3d Inconel tail pipes the replicate the Ford GT LM

Read More

Ferrari 246 Dino Inconel Manifolds from QuickSilver Sound Architects
Ferrari 246 Dino Inconel Manifolds from QuickSilver Sound Architects

March 01, 2024

We had crafted a very special pair of Inconel manifolds for a Ferrari 246 Dino where weight saving was the absolute key objective.

Read More

The most beautiful exhaust in the World
The most beautiful exhaust in the World

February 16, 2024

We showcase our QuickSilver Special Projects (QSP) exhaust system for the Ford GT. Made from Inconel this system includes the LM style conical inserts which are 3D printed, the first time QuickSilver have used this technology.  

Read More